Gold Plated RCA Phono Splitter - 1 Plug 2 Sockets Audio Y Adaptor Right Angle PAIR PHOSPL01

£9.9
FREE Shipping

Gold Plated RCA Phono Splitter - 1 Plug 2 Sockets Audio Y Adaptor Right Angle PAIR PHOSPL01

Gold Plated RCA Phono Splitter - 1 Plug 2 Sockets Audio Y Adaptor Right Angle PAIR PHOSPL01

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

The splitter box is a must have accessory for your regular usage. The Ugreen Wii Box offers added strength and flexibility, allowing for easy placement, even in tight spaces. The 2 male rca phono connectors are meant for. Further, this features a corrosion-resistant gold-plated 3.5mm connector and high-quality polished metal connectors. I saw the below product yesterday, but anybody know if I can get one here in the UK? I might have looked in the wrong places. I suppose, in my case, I could use a multi-channel mixing desk, allowing me to switch between, or cross-fade. Costly though, I would have thought. Just in case I can achieve my aim with what I've bought from Maplins, I'll post below what I bought. Maybe you or somebody else can suggest a specific combination of usage to achieve mono properly on one on my duplicated stereo feeds. I appreciate however that may not be possible. I don't want to majorly derail anything that may be going on in this thread, but I came here about to start a thread on how to make stereo into mono using phono RCA connections and cables, so this topic caught my attention.

Phono male to 2 female Audio Gold Splitter Adaptor 1 RCA Phono male to 2 female Audio Gold Splitter Adaptor

I was originally looking high and low for a stereo/mono switch to put into 1 of the 2 existing feed chains, which would have been fine, but I couldn't find one. If you have other splitters preceding the "combiner" then they too will be short circuited left to right.simply because there is zero isolation between any of the connectors on a simple splitter. Almost all buyers found that the splitter box is easy to install and use, the sound is synchronized when connected, without delay. They strongly agree that the splitter box is used to send a feed to most stereo amplifiers. Top Customer Quotes: What's 'right' here is a simple question of not doing something that will reduce sound quality, ie introduce distortion. That's trivial to ascertain and is not a subjective matter. And *anyone* can reach the same answer, it's NOT a personal thing at all. If all you can advise is 'try for yourself and see if you like the result' then that is NO advice at all. The guy doesn't want to do that, or he would not have asked in the first place. Most often the computer is the source, it play music into the amp. That is sound comes OUT of the computer and goes INTO the amp.

Especially for use with devices with no analogue input such as home cinema receivers, soundbars etc Most buyers opine that the splitter box is good for splitting a speaker between 2 inputs. In addition, a few say that the splitter box allows 3 inputs plus it is easy to use and sturdy. Moreover, they say that the splitter box is good quality for the money. Also, this product has a good strong build, looks good and does the job. In conclusion, buyers found this to be one of the best splitter box for daily purposes. If you often find yourself confused about high-value and low-price splitter box, Syncwire Phono Splitter Box is your solution. The syncwire phono splitterbox is constructed from sandblasting, anodizing and laser engraving, which make the connector able to resist pressure. You can wind it without having to worry about knots or kinks. And, this is made of tpe and bulletproof wire, and has anti-sway up to 5000+, which protect the cable from being broken. Could be a BD player with onboard decoding, and a SACD/DVD-A transport, both connecting to an older pre-HD audio decoding amp. Cambridge Audio DVD99 DVD/DVD-A/SACD/CD player using 7 (6.1) channel analogue audio output for SACD or DVD-Audio disks

Phono Splitters | CPC UK

Yeah, I can understand that. It's why I personally chose to go with the hard. There are a few fine cable makers that make soft splitters from their own designs. My reasoning, valid or not, was that to ensure the best sound I'd need to use products from the same maker and of the same design if I went that route. Also that route can be more expensive. Not saying I'm right in my thinking it was just my logic path.I saw that you said you are fairly new to this hobby. Welcome aboard and I sincerely hope it brings you a great deal of joy. It has for me and many others. We all started somewhere and this is as good a place as any for you. Please feel free to ask any questions you may have. There are alot of very knowledgeable and helpful folks here. A couple of 10kOhm resistors should do the job pretty nicely. Trouble is to construct such a combiner will probably require a bit of DIY as I can't recall ever seeing a ready made beast like this anywhere. Though I would not be surprised to find somebody making such a device. But far less common than a simple splitter.

Gold Plated RCA Phono Splitter - 1 Plug 2 Sockets Audio Y

Electronically balanced, low impedance, line level outputs. XLR pin1 is ground, pin2 is high, pin3 is low. The 1/4 inch connector's sleeve is ground, ring is low, and tip is high. We recommend balanced connections but unbalanced connections are ok." Required because my AV receiver doesn't support HDMI. I might just live with one source via optical and foregoe HD audio on there for the time being - until I can afford an HDMI amp. The phono switchers Graham pointed out would seem to be by far the cheapest and easiest option, I don't understand why you seem to have ruled these out? Okay you have to move 2 switches rather than 1 because they are only 3 wide but that doesn't seem such a hardship. MI55ION showed you a photo of precisely what you need. These 3.5mm stereo to 2 mono RCA are very common and come in all grades of quality. But rarely do they cost a lot of money.You keep talking about splitters, but you are failing to see that there is nothing to split. Also, I can't see how you can use any of the 'splitters' that have been linked to. This provides isolation between the left and right inputs so the preceding splits are not mono'ed up as well. DO NOT use a splitter as a combiner. You may not cause any actual damage (though that cannot be ruled out) but you may well cause the sound quality to be seriously compromised.

Best phono preamps 2022: budget to high-end phono stages Best phono preamps 2022: budget to high-end phono stages

Most buyers agree that the splitter box is easy to use, sound quality is just fine. They say that the splitter box is designed for customers having several audio sources and outputs. Top Customer Quotes: I've found that the vast majority of hard splitters are brass. The higher conductive metals are too soft and expensive in general. The LATs that I use are of the highest copper content I've found so far. I'm not advocating hard splitters they're just my personal preference so far. YMMV. We looked at 5 other Phono Splitter Boxes. Even though they didn’t make our 5 best Phono Splitter Boxes list, they’re the best of the best and each is still a great option. The information you’ll need to compare each one is included with the listing. Almost all buyers opine that the splitter box looks good and feels really well put together. Further, they strongly agree that this cable is good quality and connects the two devices. There are several advantages of having a splitter box for your regular usage. We are here to help you choose the best one for your purposes from all the best available products in market today.

We have collected the best splitter boxes for your daily purposes after careful scanning and comparative studies between 100’s of products. Our final collection has the best products and we also worked hard to maintain variety within our selection to accommodate personal preferences. We regularly update ourselves with the advancements in these splitter boxes since 2 years. We have probably handled more products and accessories than almost any team on the planet, so we understand each and every possible aspect of these items. I doubt I would venture down the road of buying resistors and trying to 'engineer' my own solution ... but if that is the only way, then I suppose I will have to. I think before we can make any recommendations, we need to know what equipment you have (Sound Card and Amp), and precisely what you are trying to accomplish? Are you recording music on your computer? Are you playing music from your computer? It is not really clear to me. Finally, the ugreen wii box provides superior stereo audio transmission and protection against radio frequency interference (rfi) and electromagnetic interference (emi).



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop